Infinity Kappa 60CSX 6-1/2" (160mm) Two-Way Car Audio Component System With Gap Switchable Crossover

• Seven Models to Suit All Applications and Environments: Kappa 86cfx—6" x 8" two-way car audio multielement speaker

• Patented Plus One™ Glass Fiber Woofers: Infinity’s glass fibre woofer cones are lighter and stiffer with more cone-area than the competition, delivering increased low-frequency output and higher efficiency. Hearing them is believing them.

• Edge-driven textile dome tweeters: These are not commonly used W-domes, but edge-driven textile dome speakers that will deliver a broader and smoother high-frequency response. Our larger voice coil also optimizes thermal power handling with low distortion and high reliability at high volume.

• UniPivot Tweeter: The tweeter is angled and can also be rotated 270° after installation on most models. This gives you imaging options and the ability to elevate the soundstage if the speaker is mounted low in a door. There is also a push-button tweeter level control (+O dB flat and +3 dB) to custom tune high frequencies in coaxial models for on- and off-axis speaker placement.

• 3-way Upgradability: Kappa 2-way component system crossovers are gap-selectable to accommodate a midrange upgrade. The optional midrange includes a bandpass crossover to upgrade a two-way system into a three-way system with perfect tonal balance.

• SLI(Super Low Impedance) High Output design: High output 2.5-ohm ohm architecture with low impedance voice coils enables the speaker to extract every watt from the amplifier and deliver peak power with ease. The lower impedance also compensates for any added resistance in thin factory-installed wiring.

• Ultra-High Sensitivity (up to 96dB@2.83V/1m): High sensitivity allows high output without overdriving the system. With a sensitivity of up to 96 decibels at 2.83 volts/1 meters, Kappa speakers achieve excellent volume with superb musicality with as little as 5 watts RMS. (Kappa speakers are ideal for upgrading original factory-installed speakers.)

• Harman Standard Reliability Testing: Infinity speakers have to undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light, and drives them at full power for days at a time.

• Completely Tuned: Speakers are individually tuned with outboard passive crossovers using audiophile-grade inductors and capacitors to assure high-quality audio versus “off-the-shelf” sound. This means that specifications, as well as speaker characteristics, are considered when tuning the Infinity sound.

• Kappa by Infinity: Infinity is in the business of designing reference-quality speakers, and Kappa car audio speakers are no exception. (And they look every bit as good as they sound—black with copper trim. Very tasty!)

Specifications:

Brand: Infinity

Power Handling: 100W RMS, 300W peak

Sensitivity (@ 2.83V): 93dB

Frequency Response: 45Hz – 35kHz

Voice Coil Diameter: 1-3/16 in. (30mm)

Nominal Impedance: 2.5 ohms

Package including:

       2 x Speakers

       2 x Grilles

       2 x Plastic multi-hole adapter rings

       2 x Tweeters

       2 x Flush-mount cups

       2 x Crossovers

       2 x Foam gaskets

       2 x Threaded flush-mount adapters

       2 x Plastic locking nuts

       2 x Surface-mount cups

       2 x Starfish tweeter mounts

       2 x Washers

       32 x Screws

       16 x Speed clips

       1 x Allen Head Bit (2.5mm)

       2 x Infinity Logo Badges

       2 x Brand Stickers

       Owner’s Manual

Warranty: 

      1 Year Manufacturer Warranty against manufacturing defects only.